gtag('set', {'user_id': 'USER_ID'}); // Set the user ID using signed-in user_id.

Primashield Sealer 4L

$128.75 Inc GST

PrimaShield Antifouling Sealer is a quick drying, general purpose, below waterline primer designed to provide both exceptional water barrier and tie coat properties to a large range of substrates prior to applying antifouling

PrimaShield Antifouling Sealer is used on the following substrates:

Mild steel & Corten steel hulls & keels
Timber hulls (sealed with Altex Epoxy TimberSealer)
Aged exposed epoxy primers / undercoats
Exposed fibreglass, gelcoat or GRP
Aged antifoulants – suitable for use as a barrier/sealer coat between unknown or incompatible antifoulings.
Other substrates – see over page.
Mainly used for spot priming of exposed primers & undercoats during maintenance repaints of antifoulings. These spot applications ensure good adhesion of the antifouling to an aged substrate.

Advantages:

Single pack, fast dry, direct to steel primer
Extended time to re-coat with itself or with all solvent borne antifoulings
Excellent corrosion protection
May be used to seal old antifouling coatings
Excellent application properties – easy to brush / roll
Excellent water immersion resistance
Reinforced with aluminium flake
Fully compatible primer & sealer for all Altex antifoulings
Excellent primer & sealer for immersed wooden hulls

Description

PrimaShield Antifouling Sealer is a quick drying, general purpose, below waterline primer designed to provide both exceptional water barrier and tie coat properties to a large range of substrates prior to applying antifouling

PrimaShield Antifouling Sealer is used on the following substrates:

Mild steel & Corten steel hulls & keels
Timber hulls (sealed with Altex Epoxy TimberSealer)
Aged exposed epoxy primers / undercoats
Exposed fibreglass, gelcoat or GRP
Aged antifoulants – suitable for use as a barrier/sealer coat between unknown or incompatible antifoulings.
Other substrates – see over page.
Mainly used for spot priming of exposed primers & undercoats during maintenance repaints of antifoulings. These spot applications ensure good adhesion of the antifouling to an aged substrate.

Advantages:

Single pack, fast dry, direct to steel primer
Extended time to re-coat with itself or with all solvent borne antifoulings
Excellent corrosion protection
May be used to seal old antifouling coatings
Excellent application properties – easy to brush / roll
Excellent water immersion resistance
Reinforced with aluminium flake
Fully compatible primer & sealer for all Altex antifoulings
Excellent primer & sealer for immersed wooden hulls

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.