Description
12 volt 500 GPH 1.6 amp Automatic. RULE Model 25SA
Next generation compact submersible 500 GPH Automatic Sensing electric bilge pump – no float switch required. Totally submersible pump with water cooled, ignition and TCO protected motor, stainless steel shaft and snap-on strainer base.
These pumps are extremely efficient, draw low current and offers high capacity output in a very compact housing, to fit into the smallest available space.
Please note – using the included check valve will reduce the output flow of the pump. Consumes 0.20 amps per day. 12 or 24 volt DC only – Cannot be run through 240v transformers. Available in both 12 & 24V models.
3 year limited warranty.
Fully submersible pump – 500 US gallons per hour – 31 litres per minute
Higher flow – optimised impeller to provide greater flow at the same amperage as previous model
High efficiency, low amp draw ignition protected motor includes true Electromagnetic suppression (EMC)
16 gauge tin coated copper electrical wiring with silicone infused water blocking feature – to stop water wicking down inside the wiring
Built-In thermal cut-out (TCO) in the motor provides additional protection for pump & vessel
Backflow prevention – now includes a removable check valve in the discharge nozzle which reduces the amount of water draining back from the pump discharge hose into the bilge.
Please note – using the check valve will reduce the rated output flow.
Threaded discharge port – gives easier installation and maintenance. Discharge hose port is included with each pump
Hidden air vents in the pump prevent air locking in challenging plumbing installations and helps with the check valve operation
Compact – 107mm Height x 74mm width x 64mm depth – not including discharge
1.6 amp draw @ 12v. 0.8 amp draw @ 24v. Consumes only 0.2 amps per day.
Threaded hose outlet suits 20mm (3/4″) hose.
Reviews
There are no reviews yet.