Description
12 volt 1100 GPH 3.7 amp Automatic. RULE Model 27SA
Next generation compact submersible 1100 GPH Automatic Sensing electric bilge pump – no float switch required. Totally submersible pump with water cooled, ignition and TCO protected motor, stainless steel shaft and snap-on strainer base. These pumps are extremely efficient, draw low current and offers high capacity output in a very compact housing, to fit into the smallest available space. Please note – using the included check valve will reduce the output flow of the pump. Consumes only 0.25 amps per day. 12v or 24v DC only – Cannot be run through 240v transformers. Available in 12 & 24 volt models. 3 year limited warranty.
3 year limited warranty.
Fully submersible pump – 1100 US gallons per hour – 69 litres per minute
Higher flow – optimised impeller to provide greater flow at the same amperage as previous model
High efficiency, low amp draw ignition protected motor includes true Electromagnetic suppression (EMC)
16 gauge tin coated copper electrical wiring with silicone infused water blocking feature – to stop water wicking down inside the wiring
Built-In thermal cut-out (TCO) in the motor provides additional protection for pump & vessel
Backflow prevention – now includes a removable check valve in the discharge nozzle which reduces the amount of water draining back from the pump discharge hose into the bilge.
Please note – using the check valve will reduce the rated output flow.
Threaded discharge port – gives easier installation and maintenance. Discharge hose port is included with each pump
Hidden air vents in the pump prevent air locking in challenging plumbing installations and helps with the check valve operation
Compact – 120mm Height x 74mm Width x 64mm depth – not incl. discharge
3.7 amp draw @ 12v DC. 1.8 amp @24v. Consumes only 0.25 amps per day.
Threaded hose outlets supplied for both 25mm (1 inch) and 28mm (1 1/8 inch) hose.
Reviews
There are no reviews yet.