Description
Hella EuroLED 130 Touch – Blue / White Light with White Shroud – Interior and Exterior Use – 12/24V (2JA959951121)
Surface Mount – 4 Levels of Dimming on Colour Versions
Blue / White EuroLED Touch Lamps
Advanced LED lamps with touch sensitive switching. Power saving and ultra durable. Designed and manufactured in New Zealand, EuroLED® Touch lamps provide red / white light using the latest completely sealed touch sensitive technology.
Lighting control is beautifully simple. Touch the colour pad for blue light, the white pad for white light. On the dual colour versions, hold your finger on the pad for more than two seconds and the lamp will cycle through four dimming levels. Release your finger on the light level required.
Dual colour EuroLED® Touch lamps can also be remotely operated from multiple points with off the shelf ON/OFF/ON momentary switches. Holding one of the external switches for two seconds will synchronise the lamps to the same dimming level. Light levels are remembered by the lamps circuitry, even when a vessels batteries are turned off. The lamp will always turn on at the colour intensity previously set, regardless of power interruption.
EuroLED® Touch current draw is 4W on white (0.33A @ 12V) and less than 1.5W on blue (less than 0.125A @ 12V) to provide significant power savings. Glare diffusion without light loss is important with any LED lamp to maintain efficiency and safety, particularly with powerful lamps such as the EuroLED® series. Without the protection of advanced optics, significant eye strain can result from periods of looking directly into a powerful LED point source. Advanced Hella marine lens technology provides a safe, smooth and uniform light pattern, without glare or discomfort.
The durability of EuroLED® Touch lamps is outstanding. Each lamp is completely waterproof, impact and shock resistant, for an ultra long service life. MultivoltTM circuitry provides consistent illumination across a range of input voltages from 9-33 DC, even under severe voltage fluctuations.
This lamp uses touch sensitive switching to control its operation. White or colour light can be switched ON and OFF and also dimmed.
ON / OFF Operation: touch the red or blue pad to turn the colour light ON. Touch the white pad to turn white light ON. e.g. if the white light is ON, touching the colour pad will switch white light OFF and red or blue light ON.
Dimming Operation: holding finger contact with a touch switch pad* while the light is on, for approximately 1.5 seconds will start the dimming cycle. The lamp will cycle through four dimming levels. Release finger contact at the intensity level required. Dimming starts from the previously set brightness level and increases in steps of brightness until the finger is removed from the touch switch. Once the maximum brightness is reached the lamp begins again from the lowest brightness. The lamp has a ‘memory’ and wil
Reviews
There are no reviews yet.