Description
Kuuma Force 10 Hot Water Heater – 24 Litre – 240 Volt with front rear mounting tabs
Designed For Marine, Boat, Yacht, Caravan, Motorhome and RV Use
*Now includes Magnesium Sacraficial Anode with Drain Tap for protection against Galvanic Corrosion to extend the life of your water heater.
Kuuma (previously Force 10 Marine) Water Heaters come standard with a high performance heat exchanger and a powerful 1500 watt, 240 volt electric element (for use independantly or together).
Available in 24, 45, & 75 liter sizes.
Tested and certified to the latest Australian standard; AS/NZS 60335.2.21-2002 – ESO Approval No. Q080349
UL & CE certified including the marine supplement – ignition protected.
Direct replacement for most Seaward & Atwood Marine Water heaters.
These marine hot water systems are designed for use in boats, and are also installed in many motor homes, RV\’s and transport trucks.They heat water by circulating engine cooling water through a heat exchange,The two systems can be used independently or together to heat water.
Model 40611
1500 Watt AC element (240 Volt standard)
240 Volts (also available in 110v on request – conditions apply)
Large Heat Exchange
TIG welded aluminum tank and casing
Tank Material: Aluminum
Exterior Jacket: Aluminum
Not recommended for use with raw/salt water in the engine heat exchange circuit as this will shorten the life of your water heater.
Mount Postion: front/rear
Length: 410 mm (case dimension only, does not include mounting tabs or plumbing fittings) Mounting tabs + 32 mm per end, Plumbing fittings + 70mm (this will exceed the length of the front mounting tab which is located under the plumbing fittings)
Width: 346 mm
Height: 345 mm
Dry Weight: 10kg
Warranty Period: 12 Months
You must inspect your Kuuma HWS anode every 3 months & replace when it is 50% eroded. Failure to do this will cause premature failure of the system which is not covered under warranty.
Reviews
There are no reviews yet.