POLYESTER ISO CORE ADHESIVE 20L

Description

PICKUP ONLY

Polyester ISO Core Adhesive is a isophthalic based resin. Designed as an adhesive for core materials such as marine ply, PVC foam, polyurethane and honeycomb cores.

Polyester ISO Core Adhesive is a high thixotropic resin enabling it to be put on vertical surfaces without sag or drainage. Designed to be used with a trowel or squeegee. A colour indicator is present in the resin to easily identify when catalyst has been added to resin and to ensure that it is mixed in thoroughly preventing any un-catalized resin. Polyester ISO Core Adhesive has a fast thin film cure to ease the work ability for the end user.

Polyester ISO Core Adhesive has a limited shelf life of approx. 6 months. Orders can be placed by calling our store.

Mixing Directions

Resin should be mixed in a clean plastic disposable container or measuring jug. Resin should be measured by weight only. It is very important to accurately measure resin and catalyst for optimum performance.
Ideal resin temperature is 18-25°c or room temperature. Resin temperature outside of this will have a change in pot life and working time.
Mix Methyl Ethyl Ketone Peroxide (Catalyst) with resin at a ratio of 2% by weight.
Use a syringe or scales to measure catalyst accurately, add to measured resin and mix in well. Mix for approx. 30 seconds, ensuring to scrape bottom and edges of the mixing container.
Resin pot life will be approx. 15 – 25 mins mixed at a 2% catalyst ratio *
General Safety Directions

Always consult the Safety Data Sheet (SDS). Available upon request.
Use in a well ventilated area.
Wear the following PPE safety equipment; disposable gloves, face mask, safety glasses.
If resin or catalyst comes into contact with skin or clothing. Remove contaminated clothing and wash skin with cool water. If any further symptoms persist consult your doctor or emergency department.
Dispose of all resins as per your council regulations for hazardous material.
* To be used as a guide only, ambient temperature and resin temperature will effect geltime and curing properties. The end user must test material before any application to ensure correct compatibility of the resin.