Thermo-Lite Board® Product Range

Closed-cell, lightweight composite sheet for floors, transoms and structural cores that will not rot.

People often misspell Thermo-Lite Board as “thermalite” or “thermolite”. The correct brand name is Thermo-Lite Board®.

Thermo-Lite Board

Thermo-Lite Board® is a unique closed cell, lightweight composite product manufactured with cross-linked polymer foam and fiberglass. It offers high specific strength and toughness, is non-absorbent, dimensionally stable, bonds well, and resists impact, contamination and high temperatures. It also gives useful sound and thermal insulation.

  • Sheets Full sheets only — 1220 mm wide x 2440 mm long
  • Thickness 6 mm to 38 mm (we mainly sell 19 mm for transoms)
  • Density About 320–640 kg/m³ depending on the product line
  • Also used in Horse floats, ambulances and bus floors

In the marine industry Thermo-Lite is commonly used for floors and transoms in new and older boats, replacing plywood that has rotted when used as a core. Sheets generally weigh less than an equivalent sheet of plywood. The board is about 99.9% waterproof so it will not absorb water and will not rot — but it is not UV stable, so finish it if sunlight can reach it.

Thickness and laminating tips

Transoms (19 mm)

We mainly sell 19 mm for transoms. From a full 1220 x 2440 sheet you can usually laminate cut-outs together to reach 38 mm plus the laminate. Use a good structural epoxy glue such as Techniglue R60, or vinylester resin with glue powder like cabosil (not a waxed polyester). Many customers check in stainless plate where ski hooks or outboard mounts go, so loads are spread and mounts do not compress the core.

Floors (12.7 mm+)

For floors we often see 12.7 mm sheets where supports are on 300 mm centres or less. For bigger loads step up to 15 mm or 17 mm. It cuts easily with a hand saw or jigsaw. Finish options include leaving the sheet and gluing carpet, or resin-coating (epoxy or vinylester) then flowcoating.

Shop Thermo-Lite Board Technical Data Sheet (PDF)

How do I replace a rotted floor or transom?

Rotted plywood transom core exposed during a Thermo-Lite rebuild by Kingfisher Cruisers
Photo: Kingfisher Cruisers

We are often asked in-store: “How do I replace the floor or transom in my boat?” Most older boats were built using marine plywood, which over time can absorb moisture and break down. It is a common issue — but not a simple fix.

Structural changes to your boat can directly affect its seaworthiness. If the work is not done correctly it may cause injury or worse, and that could leave you legally liable.

A Word of Caution

As much as we would love to help, we are not licensed boat builders. We cannot provide in-depth guidance in-store for complex repairs like this. Not because we do not want to help — but because:

  • We are not qualified to oversee major structural work
  • We cannot ensure advice is taken in the right context
  • And ultimately, we could be held responsible if something goes wrong

Our advice? Always consult a marine surveyor or a qualified boat builder, and ask to see their credentials before starting work.

A real Thermo-Lite rebuild

Kingfisher Cruisers at The Boat Works replaced this boat’s rotted transom, floor and stringers with Thermo-Lite, a rot-proof composite board.

Rotten wet plywood pieces removed from a boat during a Thermo-Lite rebuild
Rot removed
New Thermo-Lite floor and stringers glassed in by Kingfisher Cruisers
New floor and stringers
New Thermo-Lite transom core glassed in by Kingfisher Cruisers
New transom core
Finished boat floor and deck after a Thermo-Lite rebuild by Kingfisher Cruisers
Finished floor

Photos courtesy of Kingfisher Cruisers at The Boat Works.

Thinking of doing it yourself?

Close enough is not good enough on structural work. West System publish two free professional guides that cover structural repairs, materials and safe technique:

Basic Techniques Guide Detailed Repairs Guide Shop West System Epoxy

Other uses

Thermo-Lite Board has excellent fire-retardant properties, so it can be used for building and construction applications in fire-prone situations. It is also suitable for “wet areas” such as kitchens and bathrooms.

How can I buy Thermo-Lite Board?

In-store pickup off the rack is the easy path. We do not take payment for these sheets over the phone. For delivery, email us a business address with a forklift (a mate’s workshop or local business is fine if you arrange it). Without a forklift you will need to collect from your closest Mainfreight depot, or add about $88 if we must book a tailgate truck.

  • A 1220 x 2440 sheet takes roughly two full pallet spaces on a truck.
  • Drivers will not call ahead with an ETA, and they will not unload a sheet by hand.
  • Freight is quoted through the Mainfreight portal after we have your address, sheet count and thickness — ballpark $150 to $250 depending where you are in Australia.

Tell us how many sheets and which thickness you need when you request a quote. Shipping full sheets is not a stamped parcel, so a little patience helps.

Request a freight quote (Quick Order) View prices and stock

Questions about Thermo-Lite?

Call or email the shop and we will help you pick the right thickness.

07 5500 0002  ·  shop@marinetradesupplies.com.au

Quick Order / Quote Shop Thermo-Lite
0
0
Your Cart
Your cart is emptyReturn to Shop