PROFILE 100 EXTRA COARSE CUT COMP 3.2KG – PRE306

Description

PROFILE 100 EXTRA HEAVY CUT PASTE COMPOUND

( EX FARECLA PROFILE EXTRA COURSE CUT COMP 3.2KG)

Aggressive compounding paste for tough resins and gelcoats
Leaves a low gloss finish
Ideal for plugs and moulds

Our liquid sandpaper, Profile 100 Extra is a coarse, water-based cutting compound designed for aggressive compounding on tough resins and gel coats. It removes P600 dry sanding marks from most substrates, leaving a relatively low gloss finish.

Profile 100 Extra is often used in the first stage of a two-step polishing process when high gloss is required.

DIRECTIONS FOR USE

If needed, before polishing, sand up to:
P400 or finer (Polyester resin or gelcoat)
P600 or finer (Vinylester resin or gelcoat)
P600 or finer (Epoxy resin or gelcoat)

Ensure surface is clean, dry and cool to the touch
Mix product well before use
Apply a small amount of product to the applicator
Spread over the surface and polish (speed depends on applicator used)
Work in small areas at a time, keeping the applicator flat to the surface
Wipe clean and repeat if necessary