VINYLESTER FAIRING COMPOUND 2.4KG

Description

PICKUP ONLY

Vinylester Fairing Compound is a high build material, ideal for use in the marine and pool industry. Vinylester Fairing Compound will adhere to a wide variety of materials such as wood, plywood, brick, masonry and fibreglass. Formulated using high performance fillers and additives it can be easily sanded when cured using a fairing board, orbital sander or hand sand block. Vinylester Fairing Compound has excellent adhesion, chemical and corrosion resistant properties and should be your number one choice for filler builds and repairs below the waterline.

Please Note: Being a highly filled product has a limited shelf life. Normal shelf life if stored correctly is approx. 6months. To maintain products integrity keep in a cool and dry area, ensure the lid is tightly sealed, and mix the product each month to limit separation of the resins and fillers.

Mixing Directions

Resin should be mixed in a clean plastic disposable container or measuring jug. Resin should be measured by volume or weight only. It is very important to accurately measure resin and catalyst for optimum performance.
Ideal resin temperature is 18-25°c or room temperature. Resin temperature outside of this will have a change in pot life and working time.
Mix Methyl Ethyl Ketone Peroxide (Catalyst) with resin at a ratio of 2% by weight or volume. Do not use a BPO based peroxide hardener.
Use a syringe or scales to measure catalyst accurately, add to measured resin and mix slowly, ensuring not to create excessive air entrapment. Mix for approx. 30 seconds, ensuring to scrape bottom and edges of the mixing container.
Resin pot life will be approx. 15-25 mins mixed at a 2% catalyst ratio *
General Safety Directions

Always consult the Safety Data Sheet (SDS). Available upon request.
Use in a well ventilated area.
Wear the following PPE safety equipment; disposable gloves, face mask, safety glasses.
If resin or catalyst comes into contact with skin or clothing. Remove contaminated clothing and wash skin with cool water. If any further symptoms persist consult your doctor or emergency department.
Dispose of all resins as per your council regulations for hazardous material.
* To be used as a guide only, ambient temperature and resin temperature will effect geltime and curing properties. The end user must test material before any application to ensure correct compatibility of the resin.