AMPREG31 RESIN 18KG A/F PLASTIC PAIL

AMPREG 31
EPOXY WET LAMINATING SYSTEM
¬ Same 100:26 resin to hardener mix ratio by weight across range of hardener speeds
¬ Viscosity optimised for good fabric wet-out and drainage resistance
¬ Good cure progression from ambient only cures
¬ Tough resin matrix giving good laminate mechanical properties
¬ DNV-GL & Lloyds Register Certified formats available
¬ Low Toxicity Hardener Formulations
o Improved Hazard Labelling
o CMR & SVHC** Free
o Reduced Environmental Hazards
¬ Formulated with Gurit LRT (Light Reflective Technology) as standard
INTRODUCTION
Ampreg™ 31 has been optimised for the manufacture of large composite structures using hand layup and vacuum
bagging techniques whilst offering improved health and safety.
The viscosity of Ampreg™ 31 has been optimised for good fabric wet-out whilst maintaining good drainage resistance for
application on vertical surfaces. Ampreg™ 31 has been designed to give excellent mechanical and thermal properties
from both ambient temperature cures and moderate temperature postcures (50°C). This system is available with the full
range of Ampreg™ 3X hardener speeds, from Fast to Extra Slow.
The unique formulation offers improved health & safety through the careful selection of low toxicity raw materials as well
as Light Reflective Technology which in conjunction with a UV light-source can detect droplets as small as 1mm for easy
identification of contamination to improve industrial hygiene.