3M SAFETY HELMET ABS (TYPE 1) VENTED WHITE

Description

The Australian made 3M TA570 (vented) ABS safety helmet
(Type 1) with comfortable 6 point terylene head harness is the
central building block providing users with a face, head and
hearing certified protection system if needed. It is designed
to protect wearers from numerous hazards and compliments
a number of accessories.
The unique crown cooling vents ensures cooler and more
comfortable protection in humid conditions.
The helmet consists of a shell and a suspension system
called a harness. The shell provides the impact protection
by deflecting, whilst the harness absorbs the shock and
load. The transmission of force is dissipated through the
shell, harness by stretching and dissipating it down through
the body to the ground. The six point harness provides the
cushioning by stretching and spreading the load evenly over
the protected area.

The 25mm wide webbing maximises the surface area contact
with the wearer’s head and enhances stability/ security of the
helmet.

The area between the shell and harness is the shock
absorption zone and s

Applications:
Suitable for general use in industry for protection of the upper
part of the wearers head.
The TA570 (vented) safety helmet has been designed to
meet the requirements of AS/NZS 1801 for shock absorption,
resistance to penetration, lateral stiffness, ignition by flame
and electrial insulation (electrical hazards up to 650V) when
tested in the Hot (50°C), Cold (-5°C) and Wet conditions.
Type 1 safety helmets are suitable for general industry,
construction and mining

Features
Australian made
Type 1 ABS plastic shell
Top venting ensures cooler and more comfortable
protection
Lightweight 341g
Comfortable 6 point terylene head harness
Fit all head sizes 50 - 66cm
Terry towel sweatband absorber (replaceable)
25mm moulded slots accept all safety helmet accessories
(cap attach earmuffs and visors).
PPE combinations have been tested as an approved
combination under AS/NZS 1801:1997, AS/NZS
1337:1992, AS/NZS 1270:2002