CARBOGUARD 504 CONVERTER 250ML

A high performance, immersion grade (fresh & salt water) chemically cured epoxy primer. Suitable
for use over suitably prepared mild steel, galvanised steel, other non-ferrous metals, and most GRP
substrates.

Colour: Standard Buff
Ratio 4:1 by volume (Part A : Part B)
Gloss Flat

FEATURES:
Excellent primer for water and many aqueous chemicals immersion service when topcoated with
an approved finish
Excellent adhesion to difficult substrates
Excellent holding primer
Excellent corrosion resistance
Complies with AS/NZS 3750.13 (2 pack epoxy primer) Types 1, 2 & 3.
AS4020 Potable Water Approval (see Approvals NZ/AU section)
Good abrasion resistance
Very good aged re-coatability
Resists splash and spillage or fumes of a wide range of chemicals
Easy application by brush, roller or spray
Ideal tie-coat over inorganic zincs
Versatile - can be used on most substrates under many different types of topcoat
Long pot-life
Excellent maintenance touch-up primer for hand-cleaned substrates
A user-friendly primer for epoxy or polyurethane systems in environments not suited to zinc
primers due to acidic or alkaline fallout or splash & spill.

Cleanup: Use Thinner #2 OR #12