SEAHAWK TUFF STUFF EPOXY PRIMER HALF GAL GREY KIT
Premium Blister Protection with Microsheet Silicate Technology
Tuff Stuff is an extremely high-build two-part epoxy primer that dries fast, enabling application of a complete barrier system and bottom paint in just two days. Using microsheet silicate technology, millions of microscopic sheets overlap and build a 100% water barrier that protects the surface from moisture and water penetration.
Tuff Stuff is extremely effective for blister prevention on fiberglass, or as a bilge coating, because it is resistant to oil and water. As a universal primer, it can be used for corrosion protection on most metals below the waterline, and for priming any metal. Tuff Stuff creates an overlapping barrier to eliminate any direct path for water migration.
Typical Film Thickness (spray): 6-7.5 mils dry film thickness (DFT) per coat, (11.5-14.5 mils wet film thickness (WFT) for smoother finish.
Typical Film Thickness( roller): 3.6-4.2 mils dry film thickness (DFT) per coat, (7.0-8.0 mils wet film thickness (WFT) for smoother finish.
Recommended Coats: 2-4 depending on intended service.
Use over blistered fiberglass as a repair coat, and over unblistered fiberglass as a barrier coat.
Protects metals from corrosion, including: aluminum, bronze, stainless steel, cast iron and lead above and below the waterline.
Excellent for priming props, shafts, keels, trim tabs, thru hulls and lower units
Highest build epoxy Fewer coats needed
Longer window between coats makes Tuff Stuff easy to use
Reduced labor and less haul out time