S FILL 15 MIN RES & HARD 2L PACK Gurits SFill 15 Minute Filler is an epoxy filler system designed for rapid cure at ambient temperature, to allow sanding without clogging at just over an hour after application. As well as rapid cure and good sandability, the system has been developed to offer ease of dispense and mixing, good sag resistance during application, good cured properties. The system offers a simple 1:1 mix ratio, high levels of adhesion, low shrinkage and good thermal and mechanical properties. APPLICATION Before applying the product to the surface ensure that the surface is clean dry and free of dust. The mixed system can be applied by trowel, pallet knife or other suitable dispenser. The system can be applied in thicknesses up to 1 cm without fear of exotherm. The system is designed for application at temperatures between 10 and 30°C. Thicknesses of 10mm can be achieved on vertical surfaces without sagging at 20°C. Increase in ambient temperature results in a lower maximum application thickness. Being easy to sand, the surface of the adhesive need not be fined-faired during application. If applying other products over the SFill 15 Minute filler system, the overcoating product can be added as soon as the filler is stiff enough. This depends on thickness of filler and ambient temperature. If applied during this period the need to sand the surface of the adhesive paste is eliminated.