International Awlcraft Antifoul

Available in blue, black, 10L & 4L

SKU: N/A Category: Tags: ,


A general purpose high strength ablative cuprous oxide antifouling with minimal build up due to self polishing technology.
* Good protection for heavy fouling areas
* For use on fiberglass, wood and primed underwater metals (except aluminum)
* Quick drying
Colour YBE000-Blue, YBE001-Red , YBE002-Black
Finish Light sheen
Specific Gravity 1.6
Volume Solids 48%
VOC (As Supplied) 400 g/lt
Unit Size 4 lt
5°C (41°F) 15°C (59°F) 23°C (73°F) 35°C (95°F)
Immersion 24 hrs 12 hrs 6 hrs 3 hrs
Touch Dry 1 hrs 45 mins 30 mins 20 mins
Note: Max. Immersion Times are as follows: 5-15°C – 3 mths; 23°C – 2 mths; 35°C – 1 mth
Substrate Temperature
5°C (41°F) 15°C (59°F) 23°C (73°F) 35°C (95°F)
Overcoated By Min Max Min Max Min Max Min Max
Awlcraft Antifouling 16 hrs ext 10 hrs ext 6 hrs ext 4 hrs ext
Preparation All substrates must be clean, dry and free from contaminants. All surfaces should have been primed with the
appropriate primers. Suggested primers: Interprotect (two pack) or Primocon (single packs).
Method Apply 2 coats per season on the hull. 3 coats are required on the leading and trailing edges, waterline, rudder and keel.
This is important for best performance.
Hints Thinner YTA085 International Antifouling Thinners #3.
Thinning Do not thin unless absolutely necessary. If thinning is necessary, do not thin more than 10% by volume.
Cleaner YTA085 International Antifouling Thinners #3.
Ventilation and Humidity Control Ensure adequate ventilation during use.
Airless Spray Pressure: 176-210 bar. Tip Size: 2180.
Other For Airmix spray application – Pressure: 2.5 bar. Tip Size: 20-113. True colour will develop after immersion. For in
season maintenance wipe surface with a soft sponge or equivalent. Heavy cleaning operations on a regular basis may
remove some paint leading to a reduction of the in-service life of the coating. To prevent premature failure, ensure
correct amount of paint is applied using the coverage as a guide.
Some Important Points Not suitable for use over Aluminium/Alloy substrates or zinc sprayed surfaces.
Product temperature should be minimum -5°C and maximum 35°C.
Ambient temperature should be minimum -5°C and maximum 35°C.
Substrate temperature should be 3°C/5°F above dew point and maximum 35°C/95°F.
Compatibility/Substrates GRP, Wood, Steel/Iron, Lead. Not suitable for use over Aluminium/Alloy substrates or zinc sprayed surfaces.
Number of Coats 1-2
Coverage (Theoretical) – 6 m²/lt
(Practical) – 5.4 m²/lt by brush, 3.2 m²/lt by spray.
Recommended DFT per coat 80 microns dry
Recommended WFT per coat 167 microns wet
Application Methods Airless Spray, Airmix, Brush, Roller
Awlcraft Antifouling
Self Polishing Antifouling



Additional information

Weight N/A
Dimensions N/A
Choose Size

10L, 4L

Choose Colour

Black, Blue, Red


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.